Taiwan Machine Tools Manufacturers Sources

rumah > Tutup loop Injeksi > CHUAN LIH FA MACHINERY WORKS CO., LTD. > spesifikasi


	CHUAN LIH FA MACHINERY WORKS CO., LTD. Chuan Lih FA KARYA MESIN CO , LTD .didirikan pada tahun 1966 dan mulai dengan hanya 5 karyawan di sebuah pabrik disewa untuk produksi mesin cetak injeksi .Kami telah bersikeras pada prinsip kejujuran bisnis u0026 tanggung jawab penuh untuk semua pelanggan kami dan membayar sikap hati-hati terhadap desain mesin ketat , manufaktur yang efisien dan kontrol kualitas yang ketat dalam rangka memenuhi kepuasan pelanggan kami 100 % .
	Netz \| terkait Produk \| VIDEO

AE Series

Please visit our on-line digital catalogs for details.

Features

Employs Germany Siemens control and servo motors for excellent performance and high accuracy.
High performance injection unit that enhances the exceptional features of servo control. High speed, stability and accuracy are guaranteed.
In-house software development capability combined with technical support from Siemens.
Standardized hardware design reduces inconvenience of maintenance and parts stock.
Simultaneous control on multi-axes shortens molding cycle time dramatically.

MACHINE MODEL			CLF-40AE		CLF-80AE		CLF-120AE		CLF-180AE
INTERNATIONAL CODE			400H-100E		800H-140E		1200H-270E		1800H-46E
Injection Unit	Screw Diameter	mm	22	25	25	28	30	35	35	40	45
	Theoretical Inj. Volume	cm³	38	49	54	68	99	135	173	226	286
	Injection Pressure	kg/cm²	2634	2040	2560	2040	2730	2006	2664	2040	1612
	Inj. Holding Pressure	kg/cm²	2239	1734	2176	1734	2321	1705	2265	1734	1370
	Injection Speed	mm/sec.	300	300	300	300	300	300	300	300	300
	Injection Rate	cm³/sec.	114	147	147	185	212	289	289	377	477
	Shot Weight In GPPS	grams	34	44	49	61	89	122	156	204	258
	Screw Rotating Speed	RPM	350		350		350		300
Clamping Unit	Distance Between Columns (H x V)	mm	315 x 315		380 x 380		460x 410		510 x 510
	Dimensions Of Platens	mm	465 x 465		560 x 560		660 x 630		765 x 765
	Mold Height Max./Min.	mm	320 / 160		370 / 170		450 / 150		500 / 200
	Mold Opening Stroke	mm	260		315		360		450
	Clamping Force	Tons (KN)	40		80		120		180
	Dia. Of Locating Ring	mm	100		100		100		125
	Ejector Stroke	mm	60		80		100		120
	Ejector Force	Tons (KN)	1.5		2.5		3.3		4
General Data	Heating Zones	zone	5		5		6		6
	Heating Capacity	kw	3.9		3.9		5		7.9
	Machine Dimensions (L x W x H)	m	3.5 x 1.1 x 1.7		4 x 1.2 x 1.8		5 x 1.54 x 1.7		5.17 x 1.65 x 2
	Net Weight	Tons	3		4.1		4.3		7.5

MACHINE MODEL			CLF-230AE						CLF-285AE
INTERNATIONAL CODE			2300H-460E			2300H-785E			2850H-758E			2850H-1190E
Injection Unit	Screw Diameter	mm	35	40	45	40	45	50	40	45	50	50	55	60
	Theoretical Inj. Volume	cm³	173	226	286	264	334	412	264	334	412	491	594	707
	Injection Pressure	kg/cm²	2664	2040	1612	2974	2350	1903	2974	2350	1903	2420	2000	1680
	Inj. Holding Pressure	kg/cm²	2265	1734	1370	2528	1997	1618	2528	1997	1618	2057	1700	1428
	Injection Speed	mm/sec.	300	300	300	280	280	280	280	280	280	250	250	250
	Injection Rate	cm³/sec.	289	377	477	352	445	550	352	445	550	491	594	707
	Shot Weight In GPPS	grams	156	204	258	238	301	372	238	301	372	443	536	638
	Screw Rotating Speed	RPM	300			300			300			250
Clamping Unit	Distance Between Columns (H x V)	mm	560 x 560						610 x 610
	Dimensions Of Platens	mm	860 x 860						940 x 940
	Mold Height Max./Min.	mm	550 / 200						650 / 250
	Mold Opening Stroke	mm	550						600
	Clamping Force	Tons (KN)	230						285
	Dia. Of Locating Ring	mm	125						125
	Ejector Stroke	mm	150						150
	Ejector Force	Tons (KN)	5.2						6.2
General Data	Heating Zones	zone	6			6			6			6
	Heating Capacity	kw	7.9			10.1			10.1			13.9
	Machine Dimensions (L x W x H)	m	5.45 x 1.75 x 2.1			6.2 x 1.7 x 2.1			6.8 x 1.8 x 2.2			7 x 1.8 x 2.2
	Net Weight	Tons	9			10			12			14

MACHINE MODEL			CLF-350AE						CLF-450AE
INTERNATIONAL CODE			3500H-785E			3500H-1190E			4500H-1190E			4500H-1585E
Injection Unit	Screw Diameter	mm	40	45	50	50	55	60	50	55	60	55	60	65
	Theoretical Inj. Volume	cm³	264	334	412	491	594	707	491	594	707	665	792	929
	Injection Pressure	kg/cm²	2974	2350	1903	2420	2000	1680	2420	2000	1680	2380	2000	1704
	Inj. Holding Pressure	kg/cm²	2528	1997	1618	2057	1700	1428	2057	1700	1428	2023	1700	1449
	Injection Speed	mm/sec.	280	280	280	250	250	250	250	250	250	200	200	200
	Injection Rate	cm³/sec.	352	445	550	491	594	707	491	594	707	475	565	664
	Shot Weight In GPPS	grams	238	301	372	443	536	517	443	536	638	600	714	839
	Screw Rotating Speed	RPM	300			250			250			220
Clamping Unit	Distance Between Columns (H x V)	mm	730 x 730						810 x 810
	Dimensions Of Platens	mm	1120 x 1120						1260 x 1260
	Mold Height Max./Min.	mm	700 / 300						800 / 300
	Mold Opening Stroke	mm	680						800
	Clamping Force	Tons (KN)	350						450
	Dia. Of Locating Ring	mm	160						160
	Ejector Stroke	mm	150						180
	Ejector Force	Tons (KN)	7						10
General Data	Heating Zones	zone	6			6			6			8
	Heating Capacity	kw	10.1			13.9			13.9			16.5
	Machine Dimensions (L x W x H)	m	7 x 1.9 x 2.3			7.2 x 1.9 x 2.3			8.2 x 2.2 x 2.35			8.5 x 2.2 x 2.35
	Net Weight	Tons	20			23			25			28

terkait Produk

	Company Profile

rumah > Tutup loop Injeksi > CHUAN LIH FA MACHINERY WORKS CO., LTD. > spesifikasi